d.c 480_img

NHN 480 Series door closers incorporate the latest cam type technology, which offers easy opening with increased efficiency.

Power is adjustable by screw from EN2-4. The closing speed is easily adjusted via two independent adjustment valves. The slide arm can be fitted with a hold open device.

CE / EN3 approved to EU directives (89/106/EEC) by EN 1154:1996/A1:2002 and EN1634-1:2000. NHN 480 is backed up with a 10 years ‘No Quibble’ guarantee.

 

Standard Square Body with Cover & Accessories. EN Standard Power Adjustable by Spring EN 1154

  • NHN 480 Series offers sizes EN 2-4, spring power adjustable by power adjustment screw.
  • Back check function with cushion effect in track available.
  • Easy installation.
  • Easy speed and control adjustments by valve screws on the top of the closer body.
  • Slimline body.
  • Non-handed applications.
  • Comprehensive range of accessories including stainless steel and brass.
  • RAL9006 finish as standard with others available

 

Power size
(EN)
Door width
(mm)
Door weight
(kg)
480 Series
SLIDE ARMHOLD OPENBACK CHECK
285040480480S480BCC
395060
4110080
CE Approved / EN3CECE
Introduction
480_img_2

Function

Closing & latching speed

The closing speed from maximum opening angle to 15° and the latching speed from 15° to 0° can easily be controlled by two independent valves on the top of the closer.NHN Series 480

Back-check function (optional)

This function is built into the track of the slide arm and gives a cushion effect to the outward swing of the door. Most suited where the opening door might hit a wall ie. in a corridor, or where it could injure someone if it opens too quickly. It is recommended for use on externally opening doors in windy environments.

The back check function is adjustable within the track. Recommended angle is between 70° and 85°.

IT SHOULD NOT BE REGARDED AS A DOOR STOP!

NHN Series 480-2


Adjustment

For adjustment the closing speed screw and the latch speed screw are located on the top of the closer body.

The power adjustment screw by no. 480 Series is located at the short side of the closer body. The manual shows the setting and the number of turns required to change the power force of the no. 480 closer body.

The no. 480 series door closers are designed to allow a door opening angle of 110° by using butt hinges with a maximum offset of 10mm. Using the door closers in top jamb application or using hinges with a different offset can limit the maximum opening angle of the door.

It is recommended to fit always a door stop.

NHN Series 480-4NHN Series 480-3


Installation

Standard installation

Closer mounted hinge side of door.

480_stndard_inst

This illustration shows the NHN 480 door closer with slide arm in a right handing configuration (DIN L)


Top jamb installation

Closer mounted hinge side of door.

480_jamb_inst

This illustration shows the NHN 480 door closer with slide arm in a top jamb right handing configuration (DIN L)


Outswing installation

Closer mounted opposite hinge side of door.
In this configuration you can use the door closer for outswinging doors.

480_outswing_inst

This illustration shows the NHN 480 door closer in a left handing configuration (DIN R)

Glass Door Shoe (FP1)

For installation of the door closer on glass door (max. 10mm glass thickness).

480_glass_shoe

Drop Plate (FP2)

For fixing when the door closer can not be installed directly into the door frame.

480_drop_plate

Angle Bracket (FP3)

For transom fixing of the door closer on the push slide on case of a deep lintel of the door.

480_angle_brkt

Mounting Backplate (FP4)

For smoke and fire resistant doors

480_mount_backplate

Hold Open

Hold open device in track

480 hold_open

Back Check

Back check cushion

480 bc_cushion

Cover

480 cover

Please send us your enquiry about this product. We are ready to help you.

Please wait...