oa_edge_t_img

OA-Edge T is developed to increase the safety level on automatic swing doors and is based on active infrared triangulation technology.

Due to the modular design you can upgrade the safety level of the sensor by adding additional modules.

The OA-Edge T is in compliance with the latest European regulation EN 16005 and tested and approved by the German test organisation TÜV.

Easy Installation – The sensor is easy to install by simply clicking the master and slave modules into the profile, the master and slave modules are connected by a communication cable with connector. Altenative power supply connector on the master module makes installation more flexible and quicker.

Design – The sensor has a very slim design in order to fit on many different types of swing doors. The sensor is available in a silver or black profile completed with a black lens.

Safety – The wide detection area of each module secures a high level of safety around the door and will prevent the door leaf from hitting an object or person near the door. The OA-Edge T is tested and approved by the German test organization TÜV and in compliance with the EN 16005.

Module – The sensor can be assembled using master and slave modules according to the required safety level and the width of the swing door. For a standard configuration of 1 sensor one master module is required. Depending on the door width, a maximum of 3 slave modules can be connected to this master module.

Quick Adjustment – Adjustments to the sensor are done by the use of dipswitches and a levelling screw. When the sensor is set up an easy push on the function switch will start the initialization and learning cycle. After installation the sensor status can be easily checked by the visible LED.

Introduction 

OA-EDGE-T automatic swing door safety sensor is easy to install by simply clicking the master and slave modules into the profile, the master and slave modules are connected by a communication cable with connector. Altenative power supply connector on the master module makes installation more flexible and quicker.


Ease of installation

  • Adjustments to the sensor are done by the use of dipswitches and a levelling screw. When the sensor is set up an easy push on the function switch will start the initialization and learning cycle. After installation the sensor status can be easily checked by the visible LED.

oa_edge_t_img_2


Design

  • The sensor has a very slim design in order to fit on many different types of swing doors. The sensor is available in a silver or black profile completed with a black lens.

 

Safetyoa_edge_t_img_3

  • The wide detection area of each module secures a high level of safety around the door and will prevent the door leaf from hitting an object or person near the door. The OA-Edge T is tested and approved by the German test organization TÜV and in compliance with the EN 16005.

Module

  • The sensor can be assembled using master and slave modules according to the required safety level and the width of the swing door. For a standard configuration of 1 sensor one master module is required. Depending on the door width, a maximum of 3 slave modules can be connected to this master module.

 

 

 

 


Infrared Finderinfrared-finder

  • The Infrared finder is designed as an installation tool for the OA-Axis series, OA-Presence T and OA-EDGE-T. By using the Infrared finder it is easy to define the Active Infrared detection area accurately. When installing an automatic door without safety beams it is mandatory to make use of the Infrared finder.

 

 

 

ModelOA-Edge T
Profile ColourSilver / Black
Mounting height1.5 (4’11”) to 3.0 m (9’10”)
Detection methodTriangulation
Detection spots4 detection spots per module
Min. configuration1 master module + 1 LED module
Max. configuration4 sensor modules + 2 LED modules
Depth angle adjustment0ºC – +25ºC
Power supply12 – 24 VAC ±10% (50 /60 Hz) 12 – 30 VDC ±10%
Power consumption< 1.3W ( < 2VA at AC) at min. configuration < 3.5W ( < 4.5VA at AC) at max. configuration
Test inputOpto coupler 10 – 30 VDC Current / 6mA max
Safety/Test output 1Form C relay
Safety/Test output 2Voltage / 42 VDC Current / 0.3mA max.(resistance load)
Output hold timeApprox. 0.5 sec
Response time< 75m sec
Operating temperature-20ºC – +55ºC (-4ºF – +131ºF)
Operating humidity80%
IP rateIP54
Noise level< 70dBA
Tested in compliance withEN ISO 13849-1:2008 EN ISO 12978:2003 +A1:2009 DIN 18650-1:2010 Chapter 5.7.4 ESPE
Category2 (EN ISO13849-1 : 2008)
Performance leveld (EN ISO13849-1 : 2008)
Dimensionsvarious lengths x 44,3 x 50,7 mm (l x h x d)

Please send us your enquiry about this product. We are ready to help you.

Please wait...